The post Fiberglass Heavy duty Duct rodder appeared first on Distribution board, circuit breaker, fish tape, cable marker,anti vandal switch, Thermostat: ezitown.
]]>Item : FCP
Fiberglass cable puller,fiberglass fish tape,cable pulling
A
Model : FCP
Material:Fiberglass Fiberglass covered by ABS material sheet
wire size : 4mm,5mm,6mm,8mm,10mm,12mm,16mm
Thickness of wire:210 g/m Tensile strength of wire: 1200kg
Pulling tension fracture:4.5 Ton
Wire length max: 300M
Minimum bending radius:300mm
Diameter of reel:1200mm
Product Features:
1, the tensile strength, bending properties, and can be in the pipeline in a small free shuttle.
2, with a anti-rust traction head. exchangable screw are optional. screw size:
Dia 4mm~6mm: M6
Dia 6.5mm-8mm: M8
Dia 9mm~14mm: M12
3, strong anti-aging properties
4, UV proof fiberglass rod, but Avoid long time sunshine high-temperature above 35C
5, rod diameter classification
Fiberglass wire size : 4mm,5mm,6mm,8mm,10mm,12mm,16mm
Thickness of wire:210 g/m
Tensile strength of wire: 1200kg
Pulling tension fracture:4.5 Ton
Wire length max: 300M
Minimum bending radius (do not bend less than below redius, otherwise the rod will be broken immediately):
Dia 4mm~6mm: 140mm
Dia 6.5mm-8mm:230mm
Dia 9mm~14mm: 490mm
Diameter of reel: 550mm~1300mm
| rod(mm) | Length（m） | frame size（cm）
Height*Width*Thickness |
Net Weight（kg） |
| 4.5 | 100 | 67*55*20 handing | 8 |
| 6 | 150 | 77*65*20 handing | 14 |
| 8 | 100 | 97*87*45 handing | 24 |
| 9 | 150 | 107*97*45 wheel | 40 |
| 11 | 100 | 107*97*45 wheel | 40 |
| 11 | 150 | 117*107*45 wheel | 45 |
| 11 | 200 | 117*107*45 wheel | 50 |
| 14 | 300 | 147*137*45 wheel | 110 |
| 16 | 200 | 147*137*45 wheel | 110 |
ezitown handing duct rodder
duct rodder repair kits
Tensile strength of fiberglass rod
test method: Cut a section of 700-1000mm long conduit, bend it into an arc at room temperature of 20-25 degrees according to the minimum bending radius, and then straighten it again at a rate of 10 times/minute. It can withstand 12500 straightening tests to ensure no breakage; Or rather, it will only break after 12500 cycles. The threading tube can be bent at a temperature not exceeding 20 ° C with a bending radius of twice without breaking.
duct rodder steel structure drop box testing
Fiberglass Heavy duty Duct rodder
The post Fiberglass Heavy duty Duct rodder appeared first on Distribution board, circuit breaker, fish tape, cable marker,anti vandal switch, Thermostat: ezitown.
]]>