Holes Galvanized Steel Bands, Galvanized Steel Strapping Band

colors galvanized steel 0.8mm 10M 12cm in box

colors galvanized steel 0.8mm 10M 12cm

galvanized steel 0.8mm 10M 12cm

steel galvanized reel bands

The G series fans developed and manufactured by our company can not only produce standard-type fans according to international production, but also design and produce various cooling fans with different sizes and various uses according to individual requirements. The fan motor has been continuously improved, the production process has been improved, the product quality has been gradually improved, and it has wide application range and long service life.

When purchasing G series fans, users can put forward their own applicable requirements or provide drawings, etc. Our company will design and manufacture for users.

Installation and maintenance of cooling fan
1. Before installation, you should first check whether it is damaged or deformed due to packaging and transportation. If there is any damage or deformation, it should be repaired and installed before use.
2. Then check whether the parts and screws are loose; whether there is any collision or displacement between the blade and the fan. If they collide or shift, they should be adjusted before installation.
3. After the cooling fan is installed, it should be tested, and the fan can be used online after the fan runs normally.
4. When the fan is placed and used for a long time, the fan should be checked and trial run. If there is no abnormality, it can be used online.
5. After the fan is installed, the wiring should be sealed to prevent the leakage of the wiring caused by the short circuit and burning the motor.